published date : feb 25,2008 drawing no : sdsa6256 v1 checked : b.l.liu p .1/4 part number: ZM2BG56W-1 3. 0mmx1.0 mm right angle smd chip led lamp www.sunled.com notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.15(0.006") unless otherwise noted. 3.specifications are subject to change without notice. features z 3.0mm x 1.0mm right angle smt led, 2.5mm thickness. z low power consumption. z wide viewing angle. z ideal for back light and indicator. z various colors and lens types available. z package : 2000pcs / reel. z moisture sensitivity level : level 3. z rohs compliant. preliminary spec part number emitting color emitting material lens-color luminous intensity (if=20ma) mcd viewing angle 2 1/2 min. typ. ZM2BG56W-1 blue ingan water clear 650 1495 30 wavelength nm p 525 m2bg (ingan) unit forward voltage (typ.) (i f =20ma) v f 3.2 v forward voltage (max.) (i f =20ma) v f 3.7 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =20ma) p 525 nm wavelength of dominant emission (typ.) (i f =20ma) d 535 nm spectral line full width at half-maximum (typ.) (i f =20ma) ? 39 nm capacitance (typ.) (v f =0v, f=1mhz) c 65 pf operating characteristics (t a =25c ) absolute maximum ratings (t a =25c ) m2bg (ingan) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 100 ma power dissipation p t 111 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 electrostatic discharge threshold (hbm) 1000 v attention observe precautions for handling electrostatic discharge sensitive devices
published date : feb 25,2008 drawing no : sdsa6256 v1 checked : b.l.liu p .2/4 part number: ZM2BG56W-1 3. 0mmx1.0 mm right angle smd chip led lamp www.sunled.com ? m2bg
published date : feb 25,2008 drawing no : sdsa6256 v1 checked : b.l.liu p .3/4 part number: ZM2BG56W-1 3. 0mmx1.0 mm right angle smd chip led lamp www.sunled.com ? tape specification (units : mm) ? recommended soldering pattern (units : mm; tolerance: 0.1) ? the device has a single mounting surface. the device must be mounted according to the specifications. remarks: if special sorting is required (e.g. binning based on forward vo ltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
published date : feb 25,2008 drawing no : sdsa6256 v1 checked : b.l.liu p .4/4 part number: ZM2BG56W-1 3. 0mmx1.0 mm right angle smd chip led lamp www.sunled.com packing & label specifications ZM2BG56W-1
|
